Your gutter system needs cleaning at least twice a year – even if it has a gutter guard. Learn how to clean your gutter and gutter guard by following these useful steps.
Cleaning your gutter system can be a daunting task. The last thing you want to do is attempt to clean out the gutters when they are clogged and overflowing with debris, causing water to spill all over your yard. To avoid this from happening, it’s recommended that you clean your gutters at least twice a year – but what if you have gutter guards in place?
If you’re trying to figure out how to clean both your gutter guard Adelaide and the rain gutters themselves, then we’ve outlined 11 easy steps for you below! Follow these instructions and follow along step-by-step.
Step 1: Place a drop cloth where you will be working. The drop cloth will protect your floor from any debris that falls out of the gutter. Next, place a ladder where the gutter is located and climb up it.
Step 2: Make sure the ladder is securely positioned against the gutter. If it is, then you can let go to start cleaning your gutters! You can also have someone hold the ladder from below.
Step 3: Don’t forget to wear safety glasses and gloves. You’ll want to have a brush, bucket of soapy water, hose attachment with nozzle, gutter guards that are extended wide enough to clean the gutters without damaging them (if you use mesh), and a ladder for cleaning out the gutters themselves.
Step 4: Start climbing up the ladder. Don’t forget to bring a bucket to gather the debris that you collect from the gutter!
Step 5: Once you’re in position, remove the gutter guards. You can either remove it right away or unclip it and then remove the guard. You can also refer to your gutter guard manual (if you still have it) to know how to remove it.
Step 6: If your gutter guard has accumulated a lot of debris on top of it, remove the debris with your brush. Afterwards, proceed to clean the inside of your gutter. You can also let some of the debris fall onto your drop cloth.
Step 7: Set your gutter guard aside and start to clean the inside of your gutter. Remember that you will still need to clean your gutter guard as well. So, make sure you place it in a position where you’ll be able to reach it when you need to install it back to your gutter.
Step 8: Use a small rake to remove the pieces of debris that are stuck inside your gutter. You can even use your hand to hasten the process. Just make sure you’re wearing your work gloves to protect your hands from sharp or pointed debris.
Step 9: Have a person below hand you the hose. Make sure it’s fully extended so that it won’t restrict you from cleaning the entire area of your gutter system. Set the water pressure too high. Direct the stream of water onto your gutters for a few minutes until everything is clean.
Step 10: Scrape out any remaining debris that’s stuck on your gutters with a long-handled scraper.
Step 11: Once your gutter is clean, place your gutter guard Adelaide back and hose it one more time. Once everything is clean, drop the hose onto the ground, and your job is done.
Congratulations! You’ve just learned how to clean your gutter without breaking a sweat. Now that you have all the information you need, it’s time to give your gutter and gutter guard the cleaning it deserves.